end of life - august 2013 fp www.vishay.com vishay dale revision: 01-feb-13 1 document number: 31020 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 metal film resistors, industrial, flameproof features ? small physical size ? low cost ? fp resistors have the ability to withstand overloads up to 100 times rated power without any trace of flame ? exceptional frequency characteristics ? especially suited for ci rcuitry where functions, environments and duty cycles demand power resistors ? electroplated tin-lead or lead (pb)-free solder finish leads ? tighter tolerances available on request ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note * lead (pb)-containing terminations are not rohs-compliant. exemptions may apply. notes (1) continuous working voltage shall be or maximum working voltage, whichever is less. (2) contact factory for values outside these published range. notes (3) some packaging codes are model specific. (4) for additional information on packaging, refer to the through hole resistor packaging document ( www.vishay.com/doc?31544 ). standard electrical specifications global model historical model power rating p 25 c w power rating p 40 c w power rating p 70 c w maximum working voltage (1) v resistance range (2) ? tolerance % temperature coefficient ppm/c fp01/2 fp1/2 - - 0.5 350 10 to 1m 1, 2, 5, 10 150 fp0001 fp1 - - 1 500 10 to 1m 1, 2, 5, 10 150 fp0032 fp32 - - 1 500 10 to 1m 1, 2, 5, 10 150 fp0002 fp2 3.5 3 2 500 25 to 125k 1, 2, 5, 10 150 fp0042 fp42 - - 2 500 25 to 125k 1, 2, 5, 10 150 fp0003 fp3 4 4 3 500 22 to 125k 1, 2, 5, 10 150 fp0004 fp4 5.5 5 4 500 70 to 125k 1, 2, 5, 10 150 fp0005 fp5 6.5 6 5 600 70 to 125k 1, 2, 5, 10 150 fp0007 fp7 7.5 - 7 700 25 to 125k 1, 2, 5, 10 150 fp0010 fp10 - 10 - 700 25 to 125k 1, 2, 5, 10 150 fp0067 fp67 5 - - 500 35 to 19k 1, 2, 5, 10 150 fp0069 fp69 3 - 2 500 25 to 126k 1, 2, 5, 10 150 global part number information new global part nu mbering: fp000251k1f9251b8 (prefe rred part numbering format) global model resistance value tolerance code spec codes packaging (3) (see standard electrical specifications table) r = ? k = k ? m = m ? 10r0 = 10 ? 1k30 = 1.3 k ? 1m00 = 1.0 m ? f = 1 % g = 2 % j = 5 % k = 10 % (see spec codes table) ek = lead (pb)-free, strip el = lead (pb)-free, lacer ea = lead (pb)-free, t/r b8 = tin/lead, strip lb = tin/lead, lacer ch = tin/lead, t/r (750 pieces) cj = tin/lead, t/r (1000 pieces) g1 = tin/lead, t/r (600 pieces) historical part number: fp2 5112 f b8 (will continue to be accepted) fp2 5112 f b8 historical model resistance value tolerance code packaging p x r 0025 k f9 1 p0 51b 2 f 8 1
end of life - august 2013 fp www.vishay.com vishay dale revision: 01-feb-13 2 document number: 31020 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) lead length for product in strip pack. for product supplied in tape and reel, the actual lead leng th would be based on body siz e, tape spacing and lead trim. (2) clean lead to clean lead dimensions on fp1/2 are 0.347" (11.10 mm) maximum. derating dimensions in inches (millimeters) global model ab d fp01/2 0.360 0.020 (9.14 0.51) (2) 0.138 + 0.012 - 0.023 (3.51 + 0.31 - 0.58) 0.032 0.002 (0.81 0.05) fp0001 0.560 0.031 (14.22 0.79) 0.190 + 0.005 - 0.030 (4.83 + 0.13 - 0.76) 0.032 0.002 (0.81 0.05) fp0032 0.560 0.031 (14.22 0.79) 0.190 + 0.005 - 0.030 (4.83 + 0.13 - 0.76) 0.040 0.002 (1.02 0.05) fp0002 0.687 0.031 (17.45 0.79) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) fp0042 0.687 0.031 (17.45 0.79) 0.300 0.020 (7.62 0.51) 0.045 0.002 (1.14 0.05) fp0003 0.900 0.031 (22.86 0.79) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) fp0004 1.530 0.035 (38.86 0.89) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) fp0005 1.710 0.035 (43.43 0.89) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) fp0007 2.040 0.035 (51.82 0.89) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) fp0010 2.040 0.035 (51.82 0.89) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) fp0067 0.900 0.031 (22.86 0.79) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) fp0069 0.516 0.021 (13.11 0.53) 0.225 0.012 (5.72 0.31) 0.032 0.002 (0.81 0.05) b a 1.500 0.125 (1) (3 8 .10 3.1 8 ) d ambient temperature c fp0001, fp0002, fp0003, fp0004, fp0005, fp0007 fp01/2 fp0032 fp0042 100 8 0 60 40 20 0 50 100 150 200 250 70 r e w o p d e t a r f o % 0 50 100 150 200 250 100 8 0 60 40 20 fp0069 3 w 2 w 0.6 w 70 ambient temperature c r e w o p d e t a r f o % 40 fp0010 0 50 100 150 200 250 100 8 0 60 40 20 ambient temperature c r e w o p d e t a r f o % 0 50 100 150 200 250 100 8 0 60 40 20 fp0067 5 w 4 w 3 w ambient temperature c r e w o p d e t a r f o %
end of life - august 2013 fp www.vishay.com vishay dale revision: 01-feb-13 3 document number: 31020 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 spec codes global model spec resistor tolerance description fp01/2 5605 1, 2, 5, 10 color banded, 4 or 5 bands depending on tolerance 5610 1, 2, 5, 10 alph anumeric marking fp0001 6200 2, 5, 10 color banded, 4 bands 6201 1 color banded, 5 bands fp0032 6601 1 color banded, 5 bands 6602 2, 5, 10 color banded, 4 bands fp0002 9251 1, 2, 5, 10 alphanumeric marking fp0042 9201 1 color banded, 5 bands 9202 2, 5, 10 color banded, 4 bands fp0003 9300 1, 2, 5, 10 alph anumeric marking 9320 2, 5, 10 color banded, 4 bands 9330 1 color banded, 5 bands fp0004 9400 1, 2, 5, 10 alphanumeric marking fp0005 9500 1, 2, 5, 10 alphanumeric marking fp0007 9700 1, 2, 5, 10 alphanumeric marking fp0010 9800 1, 2, 5, 10 alphanumeric marking fp0067 9550 1, 2, 5, 10 alphanumeric marking fp0069 7500 1, 2, 5, 10 alph anumeric marking 7536 2, 5, 10 color banded, 4 bands 7538 1 color banded, 5 bands marking - dale - value - tolerance - model and case size (date and source code included on some styles) 1 % tolerance parts are marked with 5 color bands. 5 bands, eia standard rs196. 2 %, 5 % and 10 % tolerance parts are marked with 4 color bands. 4 band commercial, eia standard. third significant figure multiplier tolerance, 1-1/2 times size first significant figure second significant figure multiplier tolerance first significant figure second significant figure
end of life - august 2013 fp www.vishay.com vishay dale revision: 01-feb-13 4 document number: 31020 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 performance test maximum ? r (typical test lots) % fp01/2 fp0001 fp0032 fp0002 fp0042 fp0003 fp0004 fp0005 fp0007 fp0010 fp0067 fp0069 short time overload 0.5 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 low temperature operation 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.25 0.25 moisture resistance 1.0 1.5 1.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 shock 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 vibration 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 temperature cycle 1.0 1.0 1.0 0.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.5 load life (1000 h rated conditions) 1.0 2.0 2.0 5.0 2.0 5.0 5.0 5.0 5.0 5.0 5.0 3.0 terminal strength 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 dielectric withstanding voltage 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.25 0.25 effect solder heat 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.25 0.25 packaging global model packaging type packaging code lead (pb)-bearing lead (pb)-free fp01/2, fp0001, fp0032, fp0069 strip b8 ek tape/reel cj ea fp0002, fp0003, fp0042, fp0067 strip b8 ek tape/reel ch ea fp0004 lacer lb el tape/reel g1 ea fp0005, fp0007, fp0010 lacer lb el
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
